TM 5-3805-248-23-1
DIRECTIONAL LIGHT ASSEMBLY (FRONT) - CONTINUED
0090 00
DIRECTIONAL LAMP INSTALLATION
1.
Install new gasket (5).
2.
Install lamp (4).
3.
Position lens (2) on directional light assembly (1).
4.
Install three screws (3).
5.
Verify correct operation of directional lights (TM 5-3805-248-10).
DIRECTIONAL LIGHT ASSEMBLY REMOVAL
1.
Disconnect wire connector (9) from wiring harness.
2.
Remove nut (6), lockwasher (7) and washer (8). Discard lockwasher.
3.
Remove directional light assembly (1).
DIRECTIONAL LIGHT ASSEMBLY INSTALLATION
1.
Install directional light assembly (1).
2.
Install washer (8), new lockwasher (7) and nut (6).
1
3.
Connect wire connector (9).
8,7,6
9
4.
Verify correct operation of directional lights (TM 5-3805-248-10).
END OF WORK PACKAGE
0090 00-3/(-4 blank)
