TM 5-3805-248-23-1
DIRECTIONAL LIGHT ASSEMBLY (REAR) REPLACEMENT - CONTINUED
0091 00
DIRECTIONAL LAMP INSTALLATION - CONTINUED
5.
Verify correct operation of directional lights (TM 5-3805-248-10).
DIRECTIONAL LIGHT ASSEMBLY REMOVAL
1.
Disconnect wire connector (9) from wiring harness.
2.
Remove nut (6) and lockwasher (7). Discard lockwasher.
3.
Remove directional light assembly (3) and two washers (8).
DIRECTIONAL LIGHT ASSEMBLY INSTALLATION
1.
Install two washers (8) and directional light assembly (3).
2.
Install new lockwasher (7) and nut (6).
3.
Connect wire connector (9).
4.
Place battery disconnect switch in the ON position (TM 5-3805-248-10).
5.
Verify correct operation of directional lights (TM 5-3805-248-10).
3
6,7
9
8
END OF WORK PACKAGE
0091 00-3/(-4 blank)
