TM 5-3805-248-23-1
TORQUE CONVERTER OIL COOLER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
Unit
Wood blocks, 4x4x8
Tools and Special Tools
Personnel Required
Tool kit, general mechanic's (Item 113, WP 0338
Two
Shop equipment, common no. 1 (Item 101, WP
Equipment Condition
Device, lifting 160 lb minimum capacity
Materials/Parts
Torque converter oil cooler lines disconnected from
REMOVAL
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
Transmission oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may
cause injury.
NOTE
Weight of torque converter oil cooler assembly is 80 lb (36 kg).
1.
Attach lifting device on torque converter oil cooler assembly.