TM 5-3805-248-23-1
PARK AND EMERGENCY VALVE HOSES AND FITTINGS REPLACEMENT - CONTINUED
0146 00
INSTALLATION
NOTE
Apply anti-seizing tape halfway up the threads of all pipe and hose connections prior to installation to ensure
correct sealing.
1.
If removed, install all fittings to tee, check valve and park and emergency valve.
2.
Position hose assembly (2) on machine.
3.
Connect hose assembly (2) to check valve under operator compartment.
4.
Connect hose assembly (1) to tee.
5.
Connect hose assemblies (1 and 2) to park and emer-
1
gency valve at rear of instrument panel.
PARK
AND
EMERGENCY
VALVE
394-271
2
6.
Install upper front access plates (WP 0192 00).
7.
Install lower access plate (WP 0197 00).
8.
Install step assembly (WP 0200 00).
9.
Operate machine and verify correct operation of parking emergency brake (TM 5-3805-248-10).
10.
Shut down engine (TM 5-3805-248-10).
11.
Check for air system leaks.
END OF WORK PACKAGE
0146 00-3/(-4 blank)
