TM 5-3805-248-23-1
TRACTOR AIR BRAKE LINES AND FITTINGS REPLACEMENT - CONTINUED
0163 00
REMOVAL - CONTINUED
9.
Disconnect other end of hose assemblies (7 and 4) from elbows (8) on top of draft arm.
10.
If damaged, remove two elbows (8).
7
4
394-407
8
NOTE
Note the routing and position of the hoses, any retaining hardware and tie straps prior to removal to ensure
correct installation.
11.
Trace routing of all hose assemblies (1, 2, 3, 4, 6 and 7) and remove all retaining hardware and tie straps.
12.
Remove hose assemblies (1, 2, 3, 4, 6 and 7) from machine.
INSTALLATION
NOTE
Apply anti-seizing tape half way up the threads of all hose and fitting connections prior to installation to
ensure correct sealing.
1.
Position hose assemblies (1, 2, 3, 4, 6 and 7) on machine.
2.
If removed, install four elbows (5) on machine.
3.
If removed, install fittings to tractor air brake relay valve (WP 0159 00).
4.
Connect hose assemblies (1, 2, 3 and 4) to outside of right operator compartment wall.
5.
Connect other end of hose assemblies (1 and 2) to top of tractor air brake relay valve (WP 0159 00).
6.
If removed, install fittings to tractor quick release and holding valve (WP 0156 00).
7.
Connect other end of hose assembly (3) to tee.
8.
Connect hose assemblies (6 and 7) to tee.
9.
Connect other end of hose assembly (6) to tractor quick release and holding valve (WP 0156 00).
10.
Install all retaining hardware and new tie straps.
11.
If removed, install two elbows (8) on top of draft arm.
12.
Connect other end of hose assembly (7 and 4) to elbows (8) on top of draft arm.
0163 00-3