TM 5-3805-248-23-1
TRACTOR BRAKE ACTUATOR LINES AND FITTINGS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
References - Continued
Maintenance Level
Unit
Tools and Special Tools
Tool kit, general mechanic's (Item 113, WP 0338
Equipment Condition
Machine parked on level ground (TM 5-3805-248-
Materials/Parts
10)
Cap set, protective (Item 6, WP 0339 00)
Parking/emergency brake applied (TM 5-3805-248-
Rag, wiping (Item 35, WP 0339 00)
10)
Strap, tiedown (Item 41, WP 0339 00)
Bowl lowered to ground (TM 5-3805-248-10)
Tag, marker (Item 42, WP 0339 00)
Engine shut down (TM 5-3805-248-10)
Tape, anti-seizing (Item 43, WP 0339 00)
Battery disconnect switch in OFF position (TM 5-
3805-248-10)
References
Air pressure vented (TM 5-3805-248-10)
REMOVAL
CAUTION
Wipe area clean around all connections to be opened during removal. Cap lines and plug openings after dis-
connecting lines. Contamination of air system could result in premature failure.
NOTE
Tag hoses and fittings prior to disconnecting or removing to ensure correct installation.
Only remove fittings if necessary to replace.
This replacement is for the right side actuator lines and fittings. The procedure for the left side is identi-
cal.
