TM 5-3805-248-23-1
SCRAPER AIR TANK LINES AND FITTINGS REPLACEMENT - CONTINUED
0165 00
REMOVAL - CONTINUED
NOTE
Note the routing and position of the hoses, any retaining hardware, and tie straps prior to removal to ensure
correct installation.
9.
Trace routing of three hose assemblies and remove all retaining hardware and tie straps.
10.
Remove all scraper air tank hoses from machine.
INSTALLATION
NOTE
Apply anti-seizing tape half way up the threads of all hose and fitting connections prior to installation to
ensure correct sealing.
1.
If removed, install fittings on bowl intermediate hydraulic hose (WP 0164 00).
2.
If removed, install fittings on scraper air tank (WP 0154 00).
3.
If removed, install fittings on scraper air brake relay valve (WP 0160 00).
4.
If removed, install fittings on quick release and holding valve (WP 0157 00).
5.
Position three scraper air tank hoses on machine.
6.
Connect three scraper air tank hoses to scraper air tank (WP 0154 00).
7.
Connect scraper air tank hose to quick release and holding valve (WP 0157 00).
8.
Connect scraper air tank hose to bowl intermediate hydraulic hose (WP 0164 00).
9.
Connect scraper air tank hose to scraper air brake relay valve (WP 0160 00).
10.
Install all retaining hardware and new tie straps.
0165 00-2
