TM 5-3805-248-23-1
STEERING GEAR REPLACEMENT - CONTINUED
0176 00
INSTALLATION - CONTINUED
13.
Install key (20) in keyway of steering gear (19).
14.
Install key (22) in keyway of shaft (23).
15.
Install coupling (21) between shafts (23) and steering gear (19).
16.
Push shaft (23) toward steering gear (19).
17.
Install two bolts (25) and nuts (24) to coupling (21).
24,25
19
394-451
20
21
22
23
18.
Install key (11) in keyway of shaft (10) between engine and operator compartment.
19.
Install lever (9), bolt (13) and nut (12) on shaft (10).
20.
Install key (4) in keyway of shaft (3).
21.
Install lever (18) on shaft (3).
22.
Install two spacers (14), pin (17), washer (16), new cotter pin (15) on lever (18) and servo-receiver cylinder.
23.
Install new lockwasher (1) and nut (2) on shaft (3).
24.
Connect rod assembly (5) to lever (9).
25.
Install bolt (7), washer (8) and nut (6) to machine.
26.
Remove fill plug from steering gear (19).
0176 00-8
