TM 5-3805-248-23-1
RIGHT SIDE FENDER REPLACEMENT - CONTINUED
0204 00
REMOVAL - CONTINUED
7.
Use lifting device to pull fender (1) assembly toward
INSERT LINK
rear of machine until clear of fuel tank and remove
1
fender (1) assembly from machine.
8.
Remove lifting device from fender (1) assembly.
9.
Remove five capscrews (12) and washers (13).
10.
Separate fender (1) from shield (14).
12
13
14
394-366
INSTALLATION
1.
Position fender (1) and shield (14) together.
2.
Install five washers (13) and capscrews (12).
3.
Attach lifting device to link bracket with one bolt (10) and washer (11).
4.
Use lifting device to position fender (1) assembly on machine.
5.
Install seven washers (9), bolts (8), washers (7) and nuts (6) on fender (1).
6.
Install two washers (11) and bolts (10) on fender (1).
7.
Install five washers (3) and capscrews (2) on top of fender (1).
8.
Install washer (5) and capscrew (4) to outer top of fender (1).
9.
Remove lifting device.
10.
Remove bracket link from fender.
END OF WORK PACKAGE
0204 00-3/(-4 blank)
