TM 5-3805-248-23-1
ROLLOVER PROTECTION STRUCTURE (ROPS) REPLACEMENT - CONTINUED
0203 00
INSTALLATION - CONTINUED
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of ROPS is 675 lb (306 kg).
5.
Attach lifting device to rollover protection system (8).
8
9
6.
With assistance, use lifting device to install ROPS (8)
on operator compartment.
10
7.
Install two washers (10), bolts (9) and nuts (13).
Torque nuts (13) to 75 lb-ft (102 Nm).
8.
Install 16 washers (12) and capscrews (11). Torque
11
capscrews (11) to 75 lb-ft (102 Nm).
12
9.
Position support assembly (14) on ROPS (8).
10.
Install five buttons (15) on support assembly (14).
15
13
14
394-348
0203 00-5
