TM 5-3805-248-23-1
ROLLOVER PROTECTION STRUCTURE (ROPS) REPLACEMENT - CONTINUED
0203 00
REMOVAL - CONTINUED
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of ROPS is 675 lb (306 kg).
3.
Remove five plug buttons (15) and support assembly
(14).
4.
Attach suitable lifting device to rollover protection
8
system (8).
9
5.
Remove 16 capscrews (11) and washers (12).
10
6.
Remove two nuts (13), bolts (9) and washers (10).
7.
With assistance, use lifting device to remove rollover
protection system (8).
11
8.
Remove lifting device.
12
9.
Remove seven cap screws (19) and washers (20) from
section assembly (18).
10.
Remove section assembly (18) from ROPS (8).
15
13
14
394-348
0203 00-2
