TM 5-3805-248-23-1
ROLLOVER PROTECTION DOOR MAINTENANCE - CONTINUED
0202 00
DISASSEMBLY - CONTINUED
8.
Remove four screws (32) and washers (33) from catch
28,29
(HIDDEN) 30,31
32,33
(34).
47
46
34
9.
Remove cotter pin (29) and washer (28). Discard cot-
ter pin.
10.
Separate rod (46) from catch (34).
14
11.
Remove catch (34) and washer (28).
12.
Remove two locknuts (30), washers (31) and plate
(47). Discard locknuts.
35
13.
Remove cotter pin (43), washer (44) and rod (46). Dis-
card cotter pin.
36,37
45
14.
Remove pin (45) from rod (46).
38,39
(HIDDEN)
15.
Remove two pins (37), washers (36) and levers (35).
16.
Remove cotter pin (38), washer (39) and retaining
40
plate (42). Discard cotter pin.
394-363
43,44
41
42
17.
Remove washer (40), handcrank arm (41) and washer
(40) from shaft of handle.
18.
Remove two screws (48) and handle (49) from door assembly (14).
ASSEMBLY
1.
Install handle (49) and two screws (48) to door assem-
49
bly (14).
2.
Install washer (40), handcrank arm (41) and washer
48
(40) on shaft of handle.
3.
Install retaining plate (42), washer (39) and new cotter
pin (38) on hand crank arm (41).
14
4.
Install two levers (35), washers (36) and pins (37) on
door assembly (14).
5.
Align retaining plate (42) and rod (46) to levers (35).
6.
Install pin (45), two washers (44) and new cotter pin
(43) to levers (35).
7.
Install plate (47), two washers (31) and new locknuts
(30) on door assembly (14).
8.
Install catch (34), four washers (33) and screws (32)
on door assembly (14).
394-364
9.
Attach rod (46) to catch (34) and install washer (28)
and new cotter pin (29).
0202 00-4
