TM 5-3805-248-23-1
TRACTOR SAFETY TREADS REPLACEMENT - CONTINUED
0210 00
INSTALLATION
NOTE
Anti-skid treads may not be adjusted once applied to mounting surface. Be sure anti-skid treads are posi-
tioned correctly before applying adhesive to backing and mounting surface.
1.
Use the dimensions in the following table to cut new anti-skid treads from anti-skid bulk material.
2.
Position anti-skid treads on mounting surface.
NOTE
Anti-skid treads may not be adjusted once applied to mounting surface. Be sure anti-skid treads are posi-
tioned correctly before applying adhesive to backing and mounting surface.
Item
Dimension
1
8 in. x 26 in.
(20.3 cm x 66 cm)
2
6 in. x 6 in.
(15.3 cm x 15.3 cm)
3
6 in. x 12 in.
(15.3 cm x 30.5 cm)
4
12 in. x 24 in.
(30.5 cm x 61 cm)
5
3 in. x 12 in.
(7.6 cm x 30.5 cm)
6
10 in. x 12 in.
(25.4 cm x 30.5 cm)
7
12 in. x 12 in.
(30.5 cm x 30.5 cm)
8
9 in. x 12 in.
(22.9 cm x 30.5 cm)
When installing anti-skid treads, partially remove backing of anti-skid tread along one edge and attach to
machine. While moving across anti-skid tread, peal off backing and attach anti-skid tread to machine. Con-
tinue until anti-skid tread is completely attached.
3.
Install anti-skid treads in correct location.
4.
Verify anti-skid treads completely adhere to machine.
END OF WORK PACKAGE
0210 00-3/(-4 blank)
