TM 5-3805-248-23-1
SEAT HOSES, LINES AND FITTINGS REPLACEMENT - CONTINUED
0213 00
REMOVAL - CONTINUED
CAUTION
Wipe area clean around all connections to be opened during removal. Cap lines and plug openings after dis-
connecting lines. Contamination of air system could result in premature failure.
NOTE
All hose and tube assemblies must be tagged prior to removal to ensure correct installation.
Only remove fittings if necessary to replace.
3.
Disconnect hose assemblies (8 and 9) and tube (2) from height control valve on seat (WP 0215 00).
4.
Disconnect tube (2) from accumulator.
5.
Disconnect hose assembly (3) from cylinder.
6.
If damaged, remove elbow (1) from accumulator.
7.
If damaged, remove elbow (4) from cylinder.
3,4
CYLINDER
2
1
ACCUMULATOR
394-381
8.
Remove hose assembly (8) from bowl control housing.
9.
Remove hose assembly (3) from bowl control housing.
10.
Remove hose assembly (9) from bowl control housing.
11.
If damaged, remove elbow (5), nut (6) and lockwasher (7). Discard lockwasher.
12.
If damaged, remove elbow (13), nut (14) and lockwasher (15). Discard lockwasher.
13.
If damaged, remove elbow (10), nut (11) and lockwasher (12). Discard lockwasher.
0213 00-2
