TM 5-3805-248-23-1
HEIGHT CONTROL VALVE REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Equipment Condition
Maintenance Level
Unit
Machine parked on level ground (TM 5-3805-248-
10)
Tools and Special Tools
Tool kit, general mechanic's (Item 113, WP 0338
Parking/emergency brake applied (TM 5-3805-248-
10)
Materials/Parts
Bowl lowered to ground (TM 5-3805-248-10)
Cap set, protective (Item 6, WP 0339 00)
Engine shut down (TM 5-3805-248-10)
Cleaning compound, solvent (Item 8, WP 0339 00)
Rag, wiping (Item 35, WP 0339 00)
Battery disconnect switch in OFF position (TM 5-
Tag, marker (Item 42, WP 0339 00)
3805-248-10)
REMOVAL
1.
Move seat height control lever up and down to release pressure in hydraulic system.
CAUTION
Wipe area clean around all connections to be opened during removal. Cap lines and plug openings after dis-
connecting lines. Contamination of air system could result in premature failure.
NOTE
Use a container to catch any transmission oil that may drain from the hose assemblies after disconnect-
ing.
Tag hoses and fittings prior to disconnecting or removing to ensure correct installation.
Only remove fittings if damaged.
