TM 5-3805-248-23-1
SEAT STRAINER ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Equipment Condition
Unit
Machine parked on level ground (TM 5-3805-248-10)
Tools and Special Tools
Parking/emergency brake applied (TM 5-3805-248-
10)
Materials/Parts
Bowl lowered to ground (TM 5-3805-248-10)
Engine shut down (TM 5-3805-248-10)
Battery disconnect switch in OFF position (TM 5-
Packing, preformed
3805-248-10)
REMOVAL
WARNING
Never remove the seat front panel, any oil lines or the bolt on the seat cylinder rod until the pressure in the
hydraulic system of the seat is released. Failure to follow this warning may cause injury.
1.
Move seat height control lever up and down to release pressure in hydraulic system.
2.
Disconnect hose assembly (2) from top of seat height control valve.
3.
Remove elbow (1), strainer (3) and preformed packing (4). Discard preformed packing.
1
2
3,4
SEAT HEIGHT
CONTROL VALVE
394-380
