TM 5-3805-248-23-1
CONTROL CONSOLE ASSEMBLY REPLACEMENT - CONTINUED
0222 00
ASSEMBLY
1.
Install grommet (38), breaker assembly (39) and two
screws (40) in duct cover (33).
2.
Install sleeve (36), rod (37) and two pins (35).
3.
Position duct cover assembly (33) and install four nuts
(34) on studs. Torque nuts to 12 lb-ft (16 Nm).
4.
Connect wire assembly (32) on capacitor (30) and
install screw (31).
5.
Connect four wire assemblies (27) and two wire
27
assemblies (32) to switch assembly (20).
6.
Install five washers (29) and screws (28) on switch
assembly (20).
32
28
29
31
20
30
394-510
7.
Install four louvers (23), retainers (22) and screws (21)
21
on cover (26).
22
18 19
8.
Install wire assembly (17), new lockwasher (18), nut
(19), plate (5) and screw (24). Torque nut to 12 lb-ft
20
17
(16 Nm).
9.
Install switch assembly (20) and nut (25) on plate (5).
23
5
26
24
25
394-509
0222 00-5