TM 5-3805-248-23-1
HEATER ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Tag, marker (Item 42, WP 0339 00)
Unit
Tape, anti-seizing (Item 43, WP 0339 00)
Tools and Special Tools
Seal (6)
Tool kit, general mechanic's (Item 113, WP 0338
References
Shop equipment, common no. 1 (Item 101, WP
TM 5-3805-248-10
Bracket, link (Item 9, WP 0338 00)
Personnel Required
Lifting device, 275 lb minimum capacity
Two
Materials/Parts
Equipment Condition
Cap set, protective (Item 6, WP 0339 00)
Interior rearview mirror removed (WP 0220 00)
Cleaning compound, solvent (Item 8, WP 0339 00)
Control console assembly removed (WP 0222 00)
Rag, wiping (Item 35, WP 0339 00)
Air return console assembly removed (WP 0223
Sealant, silicone (Item 38, WP 0339 00)
WARNING
DO NOT service cooling system unless engine has been allowed to cool down. This is a pressurized cooling
system and escaping steam or hot coolant may cause serious burns.
DO NOT remove cooling system radiator cap when engine is hot. Allow engine to cool down. Loosen cap to
first stop and let any pressure out of cooling system, then remove cap. Failure to follow this warning may cause
serious burns.
Wear effective eye, glove and skin protection when handling coolants. Failure to do so may cause injury.
