TM 5-3805-248-23-1
HYDRAULIC TANK FILLER CAP AND STRAINER ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
References
Unit
Equipment Condition
Tools and Special Tools
Machine parked on level ground (TM 5-3805-248-
Tool kit, general mechanic's (Item 113, WP 0338
10)
Parking/emergency brake applied (TM 5-3805-248-
10)
Materials/Parts
Bowl lowered to ground (TM 5-3805-248-10)
Cleaning compound, solvent (Item 8, WP 0339 00)
Engine shut down (TM 5-3805-248-10)
Rag, wiping (Item 35, WP 0339 00)
Battery disconnect switch in OFF position (TM 5-
3805-248-10)
Gasket
REMOVAL
WARNING
Do not remove hydraulic tank filler cap or disconnect or remove any hydraulic system line or fitting unless
hydraulic system pressure has been relieved. Hydraulic system pressure can be over 2,500 psi (17,237 kPa),
even with engine and pump off. After maintenance, tighten all connections before applying pressure. Escap-
ing hydraulic fluid under pressure can penetrate skin, causing injury or death.
1.
Relieve hydraulic pressure (WP 0017 00).
