TM 5-3805-248-23-1
HYDRAULIC TANK HOSES, LINES AND FITTINGS REPLACEMENT - CONTINUED
0233 00
INSTALLATION - CONTINUED
WARNING
Only a qualified operator may perform the following procedure. All other personnel must clear the immedi-
ate area of the machine. Failure to follow these instructions may cause injury.
NOTE
If hose or tube assemblies were removed from a certain system, such as the ejector, operate only the ejector
control. If hose or tube assemblies were removed from all systems, operate all the controls to complete the
next procedure.
42.
Operate hydraulic controls through at least five full movements of travel. This will bleed air out of system (TM 5-3805-
248-10).
43.
Shut down engine (TM 5-3805-248-10).
44.
Check hydraulic oil level in tank and add oil as necessary (TM 5-3805-248-10).
45.
Inspect all connections for leaks (TM 5-3805-248-10).
46.
Install hood (WP 0189 00).
47.
Install engine compartment access doors (WP 0190 00).
END OF WORK PACKAGE
0233 00-16
