TM 5-3805-248-23-2
ENGINE MOUNTS REPLACEMENT - CONTINUED
0258 00
REMOVAL
1.
Remove bolt (6) and washer (5).
NOTE
Tag wire connectors, cable and harness assemblies prior to removal to ensure correct installation.
2.
Disconnect wire (1).
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause death or injury.
NOTE
Weight of support is 60 lb (27 kg).
3.
Install lifting device to support (2).
4.
Remove four bolts (4) and washers (3).
5.
Remove support (2) from engine.
6.
Remove lifting device from support (2).
1
5 6
2
3
4
394-605
0258 00-2
