TM 5-3805-248-23-2
CYLINDER HEAD ASSEMBLY MAINTENANCE
THIS WORK PACKAGE COVERS
Removal, Disassembly, Cleaning and Inspection, Assembly, Installation
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
Compound, sealing (Item 10, WP 0339 00)
Direct Support
Detergent, general purpose (Item 13, WP 0339 00)
Tools and Special Tools
Oil, lubricating (Item 32, WP 0339 00)
Tool kit, general mechanic's (Item 113, WP 0338
Rag, wiping (Item 35, WP 0339 00)
Tag, marker (Item 42, WP 0339 00)
Shop equipment, common no. 2 (Item 102, WP
Gasket (2)
Packing, preformed (4)
Shop equipment, field maintenance (Item 104, WP
Prussian blue
Seal (24)
Bushing, sleeve (Item 13, WP 0338 00)
Personnel Required
Extractor, group valve (Item 22, WP 0338 00)
Two
Gage, GP valve (Item 30, WP 0338 00)
References
TM 5-3805-248-10
Honing kit, valve guide (Item 38, WP 0338 00)
Ice
Equipment Condition
Inserter and remover, stud (Item 41, WP 0338 00)
Thermostat removed (WP 0046 00)
Lifting device, 400 lb minimum capacity
Water temperature sender removed (WP 0092 00)
Screws, forcing, 3/8 -16 NC
Ether start sender switch removed (WP 0098 00)
Push rods and arms removed (WP 0265 00)
Materials/Parts
Valve bridges removed (WP 0266 00)
Cap set, protective (Item 6, WP 0339 00)
Exhaust manifold removed (WP 0270 00)
Cleaning compound, solvent (Item 8, WP 0339 00)
Injector valve and nozzle removed (WP 0272 00)
Aftercooler removed (WP 0277 00)
Cloth, abrasive, emery (Item 9, WP 0339 00)
