TM 5-3805-248-23-2
CYLINDER HEAD ASSEMBLY MAINTENANCE - CONTINUED
0259 00
REMOVAL - CONTINUED
CAUTION
3/8-16NC
Machined surfaces of cylinder head must
FORCING SCREWS
10
be protected. Do not allow contact with
11
metal or concrete surfaces.
9.
Place cylinder head assembly on or between padded
surface or wood blocks for disassembly.
10.
Remove lifting device.
11.
Remove and discard 24 seals (10).
12.
Install seven forcing screws in block plate (11).
13.
Using seven forcing screws, remove block plate (11).
14.
Remove seven forcing screws from block plate (11).
CYLINDER
BLOCK
394-610
0259 00-4
