TM 5-3805-248-23-2
CYLINDER HEAD ASSEMBLY MAINTENANCE - CONTINUED
0259 00
DISASSEMBLY
NOTE
Cover cylinder block with clean rags to protect cylinders and machined surfaces.
1.
Remove and discard gasket (20) and two preformed packings (19).
2.
If damaged, remove and discard stud (21) and 11 studs (22).
3.
Remove two plugs (15) from top of cylinder head (16).
4.
Remove three plugs (14) from top and rear left and right of cylinder head (16).
5.
Remove plug (18) from front, left of cylinder head (16).
6.
If damaged, remove and discard six studs (17) from left of cylinder head (16).
NOTE
Each valve must be tagged with location of the valve port from which originally removed.
7.
Remove valves and springs (WP 0263 00).
14
15
16
17
18
22
21
20
19
394-612
0259 00-6
