TM 5-3805-248-23-2
CYLINDER HEAD ASSEMBLY MAINTENANCE - CONTINUED
0259 00
DISASSEMBLY - CONTINUED
8.
Remove four bolts (29), washers (28) and eye (27) from front of cylinder head (16).
9.
Remove two bolts (23), washers (24) and support (25) from rear of cylinder head (16).
10.
If damaged, remove and discard 12 expansion plugs (26) from top of cylinder head (16). Drill and pry out.
11.
If damaged, remove and discard ten expansion plugs (30) from right of cylinder head (16). Drill and pry out.
12.
If damaged, remove and discard expansion plug (31) from rear of cylinder head (16). Drill and pry out.
24
25
23
27
26
28
29
31
30
16
394-613
13.
Inspect 12 dowels (32) on top of cylinder head (16).
Replace if cracked, broken, worn, bent or scored. Con-
DOWEL
tact general support if dowel bore in cylinder head
PULLER
(16) is worn.
EXTRACTOR
14.
Using dowel puller and extractor, remove and discard
12 dowels (32) if inspection proves necessary.
16
394-614
32
0259 00-7
