TM 5-3805-248-23-2
CYLINDER HEAD ASSEMBLY MAINTENANCE - CONTINUED
0259 00
INSTALLATION - CONTINUED
9.
Apply clean oil to 20 washers (8) and bolts (7).
10.
Install 20 washers (8) and bolts (7).
11.
Torque 20 bolts (7) 1 through 20 in sequence in three steps. Torque to 200 lb-ft (271 Nm), 330 lb-ft (447 Nm), then
repeat 330 lb-ft (447 Nm) torque sequence.
12.
Install push rods and arms (WP 0265 00).
13.
Torque six bolts (7) 21 through 26 in sequence in three steps. Torque to 200 lb-ft (271 Nm), 330 lb-ft (447 Nm), then
repeat 330 lb-ft (447 Nm) torque sequence.
TORQUE SEQUENCE
7
8
394-623
7
394-622
10
CYLINDER
BLOCK
14.
Install 12 bolts (9) in top, left cylinder head (16).
9
Torque bolts to 33 lb-ft (45 Nm).
15.
Remove lifting device from cylinder head assembly.
394-624
16
0259 00-12
