TM 5-3805-248-23-2
AUTOMATIC TIMING ADVANCE UNIT MAINTENANCE - CONTINUED
0278 00
SETTING - CONTINUED
15.
Install timing pin through hole in fuel injection pump
TIMING PIN
housing and slot in camshaft.
394-487
REMOVAL
1.
Remove eight nuts (15) and washers (9) from left side
of engine.
2.
Remove cover (10) from engine.
3.
Remove and discard gasket (11).
4.
Remove four bolts (14) and retainer (13) from tap gear
assembly (12).
5.
Use a soft-faced hammer to loosen tap gear assembly
(12), then remove.
11
10
12
9
15
13
14
394-498
6.
Remove ring (17) and flange assembly (16).
16
17
394-499
0278 00-4