TM 5-3805-248-23-2
AUTOMATIC TIMING ADVANCE UNIT MAINTENANCE - CONTINUED
0278 00
REMOVAL - CONTINUED
7.
Remove two dowels (18) from flange (16).
16
394-701
18
8.
Remove dowel (24) from ring (23).
9.
Remove ring (23) from tap gear (12).
WARNING
Eye protection must be worn when performing maintenance where components or particles could fly
out during procedure. Failure to take precautions may cause injury.
Some components are under spring tension. Wear eye protection and use extreme caution when disas-
sembling them to avoid injury.
10.
Remove outer spring (19) and inner spring (20) from
19
tap gear assembly (12).
20
11.
Remove weight (22) and slide (21) from tap gear
assembly (12).
21
12.
Remove outer spring (26) and inner spring (25) from
tap gear assembly (12).
22
13.
Remove weight (28) and slide (27) from tap gear
12
assembly (12).
23
28
27
24
25
26
394-702
0278 00-5
