TM 5-3805-248-23-2
TRANSMISSION FILLER REPLACEMENT - CONTINUED
0287 00
REMOVAL
1.
Remove padlock (4) if equipped.
2.
Disconnect plate (5) and let hang by cable.
CAUTION
Wipe area clean around all connections to be opened during removal and disassembly. Cap lines and plug
openings after removing lines. Contamination of hydraulic system could result in premature failure.
NOTE
Use a container to capture any oil that may drain from lines. Dispose of oil IAW local policy and ordinances.
Ensure all spills are cleaned up.
3.
Disconnect hose assembly (1).
4.
Remove cap (2) and seal (3). Discard seal.
NOTE
If equipped with round sight glass, proceed to step 6. Do not attempt to disassemble sight gage.
5.
Remove two bolts (9), washers (10), retainer (11), seal (8), lens (7) and plate (6). Discard seal.
1
2
3
4
8 7 6
11
10
9
5
394-763
0287 00-2
