TM 5-3805-248-23-2
TRANSMISSION REPLACEMENT - CONTINUED
0286 00
INSTALLATION - CONTINUED
26.
Install pin (6) in bore in inner-left wheel wall until pin (6) seats on differential.
27.
Measure the amount of pin sticking out beyond the mounting face.
28.
Install shim(s) (4) to equal the measured thickness minus 0.002 in. (0.051 mm) and remove shim(s) (4) and pin (6).
29.
Install pin (6) and new preformed packing (5).
30.
Install shim(s) (4) to the measured thickness noted in step 27.
31.
Install cover (3), two washers (2) and bolts (1).
6
5
34
2
1
394-769
32.
Install axles (WP 0141 00).
33.
Install cutting edge worklight and harness (WP 0086 00 and WP 0122 00).
34.
35.
36.
Refill transmission to correct level (WP 0128 00).
37.
Operate machine and verify correct operation of transmission (TM 5-3805-248-10).
38.
Shut down engine (TM 5-3805-248-10).
39.
Check for transmission, final drive or hydraulic leaks.
END OF WORK PACKAGE
0286 00-11/-12 Blank