TM 5-3805-248-23-2
FLYWHEEL SCAVENGE RETARDER PUMP MAINTENANCE - CONTINUED
0288 00
ASSEMBLY
NOTE
Sleeve bearings must be fitted to 0.062 in. (1.575 mm) below inside surface of parts in which they are installed.
1.
Use brass driver and hammer to install two sleeve
38
bearings (39) not more than 0.062 in. (1.575 mm) in
manifold (40).
39
40
2.
Install two dowels (42).
3.
Use clean oil to lubricate lip of new seal (41).
4.
Use brass driver and hammer to install new seal (41).
41
5.
Install gears (38 and 43) in manifold (40).
43
39
42
394-761
6.
Use brass driver and hammer to install two sleeve
44
bearings (45) not more than 0.062 in. (1.575 mm) in
cover (44).
45
7.
Install new seal (46) on cover (44).
46
394-762
0288 00-6
