TM 5-3805-248-23-2
RETARDER OIL COOLER ASSEMBLY REPLACEMENT - CONTINUED
0291 00
REMOVAL - CONTINUED
NOTE
Tag all hose and tube assemblies prior to disconnecting to ensure correct installation.
Use a container to capture any oil that may drain from lines. Dispose of oil IAW local policy and ordi-
nances. Ensure all spills are cleaned up.
Weight of retarder oil cooler assembly is 100 lb (46 kg).
1.
Place hydraulic floor jack under retarder oil cooler assembly for support.
2.
Remove four bolts (4), washers (3), two flange halves (2) and preformed packing (1) from retarder oil cooler assembly
under left side of vehicle. Discard preformed packing.
3.
Disconnect hose assembly (5).
4.
Remove four bolts (6), washers (8), two flange halves (9) and preformed packing (10) from retarder oil cooler assembly.
Discard preformed packing.
5.
Disconnect hose assembly (7).
1
2
3
4
5
6
7
RETARDER
OIL COOLER
8
10 9
ASSEMBLY
394-765
0291 00-2
