TM 5-3805-248-23-2
RETARDER OIL COOLER ASSEMBLY REPLACEMENT - CONTINUED
0291 00
INSTALLATION - CONTINUED
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may result in injury or death to person-
nel.
NOTE
17
16
Weight of retarder oil cooler assembly is
100 lb (46 kg).
18
3.
Use hydraulic floor jack to raise shell assembly into
19
position and install.
4.
Install stud (19), nut (18), four bolts (16) and two bolts
(17).
SHELL
394-767
5.
Install bonnet (15), four bolts (14), two bolts (13),
washers (12) and bolts (11) on retarder oil cooler
11
12
13
assembly.
15
14
RETARDER
OIL COOLER
ASSEMBLY
394-766
0291 00-5
