TM 5-3805-248-23-2
RETARDER CONTROL VALVE MAINTENANCE - CONTINUED
0292 00
REMOVAL - CONTINUED
15.
Disconnect hose assembly (24).
16.
Remove elbow (26).
17.
Remove and discard preformed packing (25) from
24
elbow (26).
25,26
394-748
18.
With assistance remove four bolts (27), washers (28)
and retarder control valve assembly from machine.
28
27
RETARDER
CONTROL
VALVE
394-750
DISASSEMBLY
1.
Remove and discard preformed packings (29 and 30).
WARNING
Eye protection must be worn when performing maintenance where components or particles could fly
out during procedure. Failure to take precautions may cause injury.
Some components are under spring tension. Wear eye protection and use extreme caution when disas-
sembling them to avoid injury.
2.
Remove four bolts (31), washers (32), cover (33), preformed packing (34), slug (35), spring (36), stop (37) and spring
(38). Discard preformed packing.
0292 00-4
