TM 5-3805-248-23-2
BRAKE CONTROL VALVE REPAIR - CONTINUED
0299 00
CLEANING AND INSPECTION - CONTINUED
1.
Remove all gasket material from mounting surfaces.
2.
Clean all parts with solvent.
3.
Dry all parts with compressed air.
4.
Inspect all parts for damage and replace as necessary.
ASSEMBLY
1.
Install new preformed packing (20) on valve (18).
2.
Install retainer (19) on valve (18).
WARNING
Eye protection must be worn when performing maintenance where components or particles could fly
out during procedures. Failure to take precautions could cause injury to personnel.
Some components are under spring tension. Wear eye protection and use caution when disassembling
them, to avoid injury.
3.
Install valve (18), springs (16) and (17) and seat (15). Compress spring (16), valve (18), seat (15) and insert spring (17)
to hold components together.
4.
Position and install diaphragm (14), washer (13) and screw (12) on seat (15).
17
12
13
15
14
15
16
16
394-795
18
394-796
0299 00-5
