TM 5-3805-248-23-2
AIR DRYER REPAIR - CONTINUED
0301 00
ASSEMBLY - CONTINUED
34.
Apply lubricant from kit to bore end cover (5).
35.
Install cap (18) in end cover (5). Torque cap to 215 lb-in. (24 Nm).
36.
Apply lubricant from kit to new preformed packing (7).
37.
Install new preformed packing (7) on end cover (5) groove.
38.
Install exhaust cover (8) and three screws (9).
NOTE
Do not perform steps 39 through 42 if desiccant cartridge assembly is being replaced as a unit. Steps 39
through 42 are the procedures to fill cartridge with new desiccant material and reassemble the desiccant car-
tridge.
13
14
15
16
17
7
18
5
19
20
21
8
394-1011
12
9
11
10
394-1010
39.
Install new diaphragm (12), washer (11), and screw (10) on exhaust cover (8).
0301 00-12
