TM 5-3805-248-23-2
HYDRAULIC STEERING SERVO-RECEIVER CYLINDER REPAIR - CONTINUED
0310 00
ASSEMBLY - CONTINUED
5.
Install cartridge assembly in head assembly.
HEAD
6.
Install ring (28) and new preformed packing (29).
ASSEMBLY
7.
Use clean lubricating oil to lubricate ring (28) and new
preformed packing (29).
28
29
CARTRIDGE
ASSEMBLY
394-962
8.
Install head assembly in tube (27).
HEAD
ASSEMBLY
27
394-961
9.
Install one of two rings (25) in rod (24).
10.
Use pipe and hammer to install bearing (26) until it is
24
against one of two rings (25).
11.
Install remaining ring (25).
25
26
25
394-960
0310 00-7
