TM 5-3805-248-23-2
HYDRAULIC STEERING SERVO-RECEIVER CYLINDER REPAIR - CONTINUED
0310 00
ASSEMBLY - CONTINUED
19.
Attach rod assembly (3) eye in soft-jawed vise.
20.
Install piston (5) and nut (4) on rod assembly.
4
5
394-965
3
CAUTION
Use care when installing new seals. Outside diameter and both sides must be free of nicks, cuts, burrs and all
other imperfections.
NOTE
Heat new seals in 180F (82C) water for 10 minutes to soften seal surfaces and aid in installation.
21.
Install new ring (8), new preformed packing (9) and
9
new seal (10) on piston (5).
8
5
10
394-966
22.
Remove nut (4) and piston assembly from rod assem-
bly (3).
4
3
PISTON
ASSEMBLY
394-967
0310 00-9
