TM 5-3805-248-23-2
STEERING CONTROL VALVE MAINTENANCE - CONTINUED
0312 00
ASSEMBLY - CONTINUED
54
10.
Install new preformed packing (51) on seat (50).
NOTE
53
49
Lubricate bore of body with clean lubricat-
50
52
ing oil before installing seat.
51
5
11.
Install seat (50), inserting preformed packing (51) end
first.
12.
Install ball (49) in seat (50).
13.
Install new preformed packings (52 and 53) and plug
(54) in steering control valve (5).
394-981
14.
Install new seal (48) on spacer (47).
15.
Use clean lubricating oil to lubricate bore of steering
5
control valve (5) before installing spacer (47).
46
16.
Install spacer (47) in steering control valve (5).
17.
Install pilot (46) in steering control valve (5) until
seated against counterbore.
394-980
47,48
18.
Use driver and hammer to install new seal (44) until
lip of new seal (44) meets counterbore and is facing
outside of cover (40).
40
43
19.
Use clean lubricating oil to lubricate lip of new seal
(44).
44
20.
Install new preformed packings (45, 43 and 42) in
cover (40).
42
45
394-979
0312 00-9
