TM 5-3805-248-23-2
STEERING CONTROL VALVE MAINTENANCE - CONTINUED
0312 00
INSTALLATION - CONTINUED
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
2.
Install lifting device on steering control valve (5).
3.
Use lifting device to position steering control valve (5)
as an assembly 4 in. (10 cm) above support (4).
4.
Connect hose assembly (3) to elbow.
1
5.
Use lifting device to position steering control valve
(5), with hose assembly (3) attached, on support (4).
2
5
6.
Remove lifting device.
7.
Install three washers (2) and bolts (1) in steering con-
trol valve (5).
3
394-972
4
8.
Connect all steering control valve hose and tube assemblies (WP 0180 00).
0312 00-13
