TM 5-3805-248-23-2
HEATER ASSEMBLY, PLENUM, HOUSING AND COIL REPLACEMENT - CONTINUED
0318 00
INSTALLATION - CONTINUED
4.
Position new seal (44) and housing (52) in case assem-
48
49
bly (7) and install three washers (46), bolts (47) and
45
nuts (45).
47
44
46
5.
Install four washers (51) and bolts (50) on housing
(52).
6.
Install seven retainers (53) on bolts (47 and 50).
50
7.
Install new seal (48) and filter (49) in housing (52).
51
53
52
7
394-1042
8.
Position new seal (43) and housing (35) on case
30
31 23
assembly (7) and install three washers (41), bolts (40)
32
and nuts (42).
9.
Install four washers (36) and bolts (37) on housing
(35).
6
43
32
10.
Install seven retainers (34) on bolts (37 and 40).
33
11.
Install new seal (38) and filter (39) in housing (35).
12.
Install fitting (6 and 23) and plates (31 and 33) on case
42
assembly (7) with two nuts (30 and 32).
7
41
40
34
35
37 36
38
394-1041
39
0318 00-7
