TM 5-3805-248-23-2
HEATER ASSEMBLY, MOTOR, BLOWER ASSEMBLIES AND CASE REPAIR
THIS WORK PACKAGE COVERS
Disassembly, Cleaning and Inspection, Assembly
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanic's (Item 113, WP 0338
Seal (4)
Materials/Parts
Equipment Conditions
Heater assembly plenum, housing and coil removed
DISASSEMBLY
1.
Remove nut (4), washer (5) and clip (3) from heater
assembly (8).
3
4
NOTE
5
Tag wire connectors prior to removal to
ensure correct installation.
2
6
2.
Disconnect three wire connectors (11) from harness
1
assembly (10).
7
11
3.
Remove and discard tie down strap (9) from harness
(10).
4.
Remove four nuts (6) and washers (7) from motor
assembly (8).
5.
Remove four nuts (2) and washers (1) from motor
assembly (8).
10
8
9