TM 5-3805-248-23-2
HEATER ASSEMBLY, MOTOR, BLOWER ASSEMBLIES AND CASE REPAIR - CONTINUED
0319 00
ASSEMBLY - CONTINUED
9.
Connect wire connector (24) to bolt (25).
10.
Install lock (23) on motor assembly (8) with two washers (26) and bolts (25).
11.
Install plate (27) on motor assembly (8) with two washers (32 and 33) and bolts (31).
12.
Position blower wheel (28) on motor assembly and tighten setscew (29).
13.
Install housing (30) on motor assembly (8) with four washers (34) and bolts (35).
29
30
25
28
26
24
27
23
8
31
33 32
34
35
394-1048
14.
Install plate (20) on motor assembly (8) with two
8
washers (17) and nuts (16).
17
15.
Position blower wheel (21) on motor assembly (8) and
16
tighten setscrew (15).
15
16.
Install housing (22) on motor assembly (8) with three
washers (19) and bolts (18).
22
17.
Install two new seals (14) on housing (22).
18
19
20
21
394-1047
0319 00-6
