TM 5-3805-248-23-2
IDLER GEAR REPLACEMENT - CONTINUED
0352 00
INSTALLATION
1.
Install shaft (8) and five bolts (7).
CAUTION
Exercise care when installing key in camshaft. If necessary, tap key lightly with soft hammer to seat prop-
erly. Make sure key is level and fully seated. Failure to follow this procedure could result in damage to
equipment.
2.
Install key (5) in groove of camshaft.
WARNING
Use insulated, heat-resistant gloves to handle extremely hot components. Failure to follow these instructions
may cause injury.
CAUTION
Use care when installing camshaft gear on camshaft. Camshaft gear must be thoroughly heated to install. Do
not strike camshaft gear with any object in an attempt to install it on camshaft. Failure to follow this proce-
dure could result in damage to equipment.
3.
Use oven to heat camshaft gear (6) for a minimum of two hours to a maximum temperature of 500F (260 C).
4.
Install camshaft gear (6).
0352 00-3