TM 5-3805-248-23-2
IDLER GEAR REPLACEMENT - CONTINUED
0352 00
INSTALLATION - CONTINUED
NOTE
Drive bearing through from rear face of idler gear to a depth of 0.060 in. (1.524 mm).
5.
If removed, install new bearing (4), in idler gear (3).
6.
Position and install gear (3) assembly on engine block. Align "V" mark on idler gear (3) with "V" mark on crankshaft
gear. Align two "K" marks on camshaft gear (6) with right edge of idler gear (3).
7.
Install plate (2) and four bolts (1).
1
2
3,4
394-1181
CAUTION
Before engine can be returned to service, the timing of the automatic timing advance unit must be checked.
Refer to WP 0278 00 and WP 0380 00.
8.
Install engine front cover (WP 0340 00).
9.
Operate engine and verify correct operation (TM 5-3805-248-10).
END OF WORK PACKAGE
0352 00-4
