TM 5-3805-248-23-2
AIR-FUEL RATIO CONTROL MAINTENANCE - CONTINUED
0355 00
INSTALLATION
1.
Install new gasket (10) on air-fuel ratio control (8).
2.
Install air-fuel ratio control (8), two lockwashers (5), washers (7) and one of two bolts (6) on left side of engine.
3.
Cut 11.8 in. (300 mm) length of new wire (3).
4.
Install new wire (3) through holes in one of three bolts (22), remaining one of two bolts (6) and bolt on governor assem-
bly.
5.
Use crimping tool to install new seal (4) over new wire (3). Bend new seal (4) at score line.
6.
Connect hose assembly (1) to elbow (2) in diaphragm housing (9).
10
3
1
4
8
2
5
7
6
9 8 22
394-1227
394-1226
0355 00-7
