TM 5-3805-248-23-2
AIR-FUEL RATIO CONTROL MAINTENANCE - CONTINUED
0355 00
FUEL RATIO CONTROL AND GOVERNOR CHECK
NOTE
Governor seals do not have to be cut or removed for procedure that follows.
1.
Remove plug (31) and cover (30) from fuel injection pump housing.
31
GOVERNOR
CONTROL LINKAGE
30
394-1718
34
38
32
33
37
36
35
394-1720
394-1719
2.
Install and zero fuel injection tool kit as follows:
a.
Install collet (36) on bracket assembly (33).
b.
Position indicator (35) arm in approximate middle of its travel to ensure it engages in slot (38) in rack, and install
bracket assembly (33) on fuel injection pump housing.
c.
Install ground body bolt (37) first. Then install bolt (34) and ensure indicator (35) arm moves freely.
d.
Position indicator (35) in collet (36).
0355 00-8
