TM 5-3805-248-23-2
PRESSURE CONTROL VALVE REPAIR - CONTINUED
0368 00
DISASSEMBLY - CONTINUED
1
2
3
4
5
6
7
9
394-860
8
4.
Remove piston (20) and preformed packing (19) from body (2). Discard preformed packing.
5.
Remove piston (18) and preformed packing (17). Discard preformed packing.
WARNING
Always wear safety glasses when removing or installing parts restraining compressed springs. Remove
restraining parts slowly to relieve spring pressure. Injury may result if you do not follow this procedure.
NOTE
12
Spacers in step 7 are used in the pressure
10
control valve to increase pressure. There-
10 11
2
fore, the quantity of spacers in use is vari-
able.
13
6.
Remove slug (16), spool (15), spacers (14) and spring
14
(13).
15
7.
Remove and discard two preformed packings (10) and
16
preformed packing (11).
8.
Remove two balls (12) from body (2).
20
394-861
18 17
19
0368 00-3
