TM 5-3805-248-23-2
PRESSURE CONTROL VALVE REPAIR - CONTINUED
0368 00
DISASSEMBLY - CONTINUED
9.
Remove 10 bolts (21) and washers (22) from valve
22
body (1).
10.
Remove cover (23) and two preformed packings (24).
23
Discard preformed packings.
1
21
24
24
394-862
CAUTION
Spacers, springs, retainers, pistons, plungers and slugs from each bore must be kept separate and labeled
after disassembly. They must be assembled in the same bore from which they were removed. Failure to fol-
low this procedure could result in damage to equipment.
NOTE
Spacers in step 12 are used in the pressure control valve to increase pressure. Therefore, the quantity of spac-
ers in use is variable.
11.
Remove spacers (28) and retainer (27) from valve body (1).
12.
Remove spool (25), sleeve (26), retainer (31), spring (30) and spacer (29).
25
26
1
31
30
29
27
28
394-863
0368 00-4
