TM 5-3805-248-23-2
PRESSURE CONTROL VALVE REPAIR - CONTINUED
0368 00
ASSEMBLY
CAUTION
Exercise care to keep dust, dirt and other contaminants out of shift pressure valve assembly. Make sure
hands, clothing and tools are clean. Do not assemble these parts where wind may carry airborne particles.
Failure to follow this procedure could result in damage to equipment.
1.
Install stops (71, 72 and 67) in valve body (1) Align
holes.
70
69
2.
Use a brass punch to install dowels (70, 69 and 68).
68
The ends of dowels (70, 69 and 68) must be below the
71
surfaces of valve body (1).
67
1
72
394-871
3.
Install plunger (63), spring (64) and retainer (65) in
62
spool (62).
63
4.
Use retaining ring pliers to install ring (66) on spool
64
(62).
65
66
394-870
5.
Use clean lubricating oil to lubricate spool assembly
SPOOL ASSEMBLY
and install in valve body (1).
6.
Install slug (61).
61
1
394-869
0368 00-10
